HandHeld Entertainment Document Reader 4800dr - Manual (Page 37)

4800dr Barcode Guide 3 - 15
Video Reverse
Video Reverse is used to allow the document reader to read barcodes that are inverted. The “Off” barcode below is an example
of this type of barcode. If additional menuing is required, Video Reverse must be disabled to read the menu barcodes and then
re-enabled after menuing is completed.
Note: Images downloaded from the unit will not be reversed. This is a setting for decoding only.
Mandatory Alignment Flag
The 4800dr can be set to require that the reader tray be aligned properly before an image can be snapped and shipped. This
prevents users from capturing images on an unaligned 4800dr, which can result in poor quality images. If the Mandatory
Alignment Flag is On, no images will be captured until the alignment has been performed using an alignment page. If the
mandatory alignment flag is Off, images can be captured whether or not the device has been aligned properly. Default =
Mandatory Alignment Flag On.
Working Orientation
Some barcodes are direction-sensitive. For example, KIX codes and OCR can misread when scanned sideways or upside down.
Use the working orientation settings if your direction-sensitive codes will not usually be presented upright to the document reader.
Default = Upright.
On
* Off
* Mandatory Alignment Flag On
Mandatory Alignment Flag Off
Upright:
Rotate Code Clockwise 90°:
Upside Down:
Rotate Code
Counterclockwise 90°: