HandHeld Entertainment Document Reader 4800dr - Manual (Page 100)

9 - 2 4800dr Barcode Guide
Show Data Format
Scan the barcode below to show current data format settings.
Resetting the Standard Product Defaults
If you aren’t sure what programming options are in your document reader, or you’ve changed some options and want the
standard product default settings restored, scan the Standard Product Default Settings barcode below.
The Menu Commands starting on page 10-3 lists the standard product default settings for each of the commands (indicated by
an asterisk (*) on the programming pages).
Test Menu
When you scan the Test Menu On code, then scan a programming code in this manual, the document reader displays the content
of a programming code. The programming function will still occur, but in addition, the content of that programming code is output
to the terminal.
Note: This feature should not be used during normal document reader operation.
2D PQA (Print Quality Assessment)
Two-dimensional Print Quality Assessment (2D PQA) is a feature of Hand Held Products’ image readers where the data from
the successful read of a 2D barcode symbol is augmented with lines of text that both identify the symbol, and also report graded
measurement parameters obtained from it.
2D PQA Reporting
Hand Held Products' 2D PQA reporting can be enabled in two different modes: Full Report or Screening. (To see displayed
results, Microsoft® Notepad, a word processor/editing program, or Quick*View (page 9-4) is recommended.)
If you are using Quick*View, you can enable Full Report, a listing of all of a symbol's identifying information, measurements, and
corresponding grades, by typing the following menu command:
2D_PQA1
or by scanning the following barcode:
Note: The PQA report is sent out as a second data/beep sequence after the barcode data. The report has its own Hand Held
Products code ID of >(0X3E) so it can be uniquely identified.
Data Format Settings
Standard Product Default Settings
On
* Off
Full Report