HandHeld Entertainment Document Reader 4800dr - Manual (Page 50)

6 - 2 4800dr Barcode Guide
EXAMPLE: Decode only those barcodes with a count of 9-20 characters.
Min. length = 09 Max. length = 20
EXAMPLE: Decode only those barcodes with a count of 15 characters.
Min. length = 15 Max. length = 15
For a value other than the minimum and maximum message length defaults, scan the barcodes included in the explanation of
the symbology, then scan the digit value of the message length and Save barcodes on the Programming Chart inside the back
cover of this manual. The minimum and maximum lengths and the defaults are included with the respective symbologies.
Codabar
Codabar
Codabar Start/Stop Characters
Start/Stop characters identify the leading and trailing ends of the barcode. You may either transmit, or not transmit Start/Stop
characters.
Default = Don’t Transmit.
Codabar Check Character
Codabar check characters are created using different “modulos.” You can program the document reader to read only Codabar
barcodes with Modulo 16 check characters. Default = No Check Character.
No Check Character
indicates that the document reader reads and transmits barcode data with or without a check character.
When Check Character is set to Validate and Transmit, the document reader will only read Codabar barcodes printed with a
check character, and will transmit this character at the end of the scanned data.
* On
Off
Transmit
* Don’t Transmit