HandHeld Entertainment Document Reader 4800dr - Manual (Page 19)

4800dr Barcode Guide 2 - 3
Keyboard Style
This programs keyboard styles, such as Caps Lock and Shift Lock. Default = Regular.
Regular
is used when you normally have the Caps Lock key off.
Caps Lock is used when you normally have the Caps Lock key on.
Shift Lock is used when you normally have the Shift Lock key on (not common to U.S. keyboards).
Automatic Caps Lock
is used if you change the Caps Lock key on and off. The software tracks and reflects if you have Caps
Lock on or off (AT and PS/2 only). This selection can only be used with systems that have an LED which notes the Caps Lock
status.
Autocaps via NumLock barcode should be scanned in countries (e.g., Germany, France) where the Caps Lock key cannot be
used to toggle Caps Lock. The NumLock option works similarly to the regular Auotcaps, but uses the NumLock key to retrieve
the current state of the Caps Lock.
Emulate External Keyboard
should be scanned if you do not have an external keyboard (IBM AT or equivalent).
Note: After scanning the Emulate External Keyboard barcode, you must power cycle your computer.
Keyboard Modifiers
This modifies special keyboard features, such as CTRL+ ASCII codes and Turbo Mode.
Control + ASCII Mode On:
The document reader sends key combinations for ASCII control characters for values 00-1F. Refer
to Keyboard Function Relationships , page 8-1 for CTRL+ ASCII Values. Default = Off
* Regular
Caps Lock
Shift Lock
Automatic Caps Lock
Autocaps via NumLock
Emulate External Keyboard
Control + ASCII Mode On
* Control + ASCII Mode Off