HandHeld Entertainment Document Reader 4800dr - Manual (Page 69)

4800dr Barcode Guide 6 - 21
EAN/JAN-8 Addenda Required
When Addenda Required is set to on, the document reader will only read EAN/JAN-8 barcodes that have addenda. Default =
Not Required.
EAN/JAN-8 Addenda Separator
When this feature is on, there is a space between the data from the barcode and the data from the addenda. When turned off,
there is no space.
Default = On.
MSI
MSI
MSI Check Character
Different types of check characters are used with MSI barcodes. You can program the document reader to read MSI barcodes
with Type 10 check characters. Default = Validate Type 10, but Don’t Transmit.
When Check Character is set to Validate and Transmit, the document reader will only read MSI barcodes printed with the
specified type check character, and will transmit this character at the end of the scanned data.
When Check Character is set to Validate, but Don’t Transmit, the unit will only read MSI barcodes printed with the specified
type check character, but will not transmit the check character with the scanned data.
* Not Required
Required
Off
* On
On
* Off
Validate Type 10 and Transmit
* Validate Type 10, but Don’t
Transmit