HandHeld Entertainment Document Reader 4800dr - Manual (Page 27)

4800dr Barcode Guide 3 - 5
Presentation Sensitivity
Presentation Sensitivity is a numeric range that increases or decreases the document reader's reaction time to barcode
presentation. To set the sensitivity, scan the Sensitivity barcode, then scan the degree of sensitivity (from 0-20) from the inside
back cover, and Save. 0 is the most sensitive setting, and 20 is the least sensitive. Default = 1.
Hands Free Time-Out
The Scan Stand, and Presentation, and Streaming Presentation Modes are referred to as “hands free” modes. If the document
reader’s trigger is pulled when using a hands free mode, the document reader changes to manual trigger mode. You can set the
time the document reader should remain in manual trigger mode by setting the Hands Free Time-Out. Once the time-out value
is reached, (if there have been no further trigger pulls) the document reader reverts to the original hands free mode.
Scan the Hands Free Time-Out barcode, then scan the time-out duration (from 0-300,000 milliseconds) from the inside back
cover, and Save. Default = 5,000 ms.
Reread Delay
This sets the time period before the document reader can read the same barcode a second time. Setting a reread delay protects
against accidental rereads of the same barcode. Longer delays are effective in minimizing accidental rereads. Use shorter
delays in applications where repetitive barcode scanning is required. Default = Medium.
Reread Delay only works when in
Presentation Mode or Hands Free Time-Out (page 3-5).
User-Specified Reread Delay
If you want to set your own length for the reread delay, scan the barcode below, then set the delay (from 0-30,000 milliseconds)
by scanning digits from the inside back cover, then scanning Save.
Sensitivity
Hands Free Time-Out
Short (500 ms)
* Medium (750 ms)
Long (1000 ms)
Extra Long (2000 ms)
User-Specified Reread Delay