HandHeld Entertainment Document Reader 4800dr - Manual (Page 64)

6 - 16 4800dr Barcode Guide
UPC-E0
UPC-E0
Most U.P.C. barcodes lead with the 0 number system. For these codes, use the UPC-E0 selection. If you need to read codes
that lead with the 1 number system, use UPC-E1 (page 6-17). Default = On.
UPC-E0 Expand
UPC-E Expand expands the UPC-E code to the 12 digit, UPC-A format.
Default = Off.
UPC-E0 Addenda Required
When Addenda Required is set to on, the document reader will only read UPC-E barcodes that have addenda. Default = Not
Required.
UPC-E0 Addenda Separator
When this feature is on, there is a space between the data from the barcode and the data from the addenda. When turned off,
there is no space.
Default = On.
* UPC-E0 On
UPC-E0 Off
* Off
On
* Not Required
Required
Off
* On