beautypg.com

How your hp fax will answer fax calls, Case b: faxing with a distinctive, Ring service on the same line – HP 1240 Series User Manual

Page 92

background image

hp fax 1240 series

chapter 7

82

fax

setup

case B: faxing with a distinctive ring service on the same line

If you subscribe to a distinctive ring service through your phone company that
allows you to have multiple phone numbers on one phone line, each with a
different ring pattern, connect your HP Fax as described in this section.

1

Using the phone cord supplied in the box with your HP Fax, connect one
end to your telephone wall jack, then connect the other end to the port
labeled “1-LINE” on the back of your HP Fax.

Caution!

If you do not use the supplied cord to connect from the

telephone wall jack to your HP Fax, you probably will not be able
to fax successfully. This special 2-wire cord is different from the
more common 4-wire phone cords you might already have in your
office. For more information about how to tell the difference
between the cords, see

I have difficulties when sending faxes and

when receiving faxes.

on page 105.

2

Press the

Answer Mode

button on the front panel until

Fax

appears on the

display.

3

Change the

Answer Ring Pattern

setting to the pattern that has been

assigned by the phone company to your fax number—for example,
double rings or triple rings.
a. Press

Setup

.

b. Press

4

, then press

1

.

c. Press ! to scroll through the options.
d. When the ring pattern that the phone company established for your

fax number appears on the display, press

OK

.

Note:

Your HP Fax is factory-set to answer all ring patterns. If you do not

set the correct ring pattern assigned by the phone company to your fax
number, your HP Fax might answer both voice calls and fax calls or it might
not answer at all.

how your hp fax will answer fax calls

Your HP Fax will automatically answer incoming calls that have the ring pattern
you selected (Answer Ring Pattern setting) after the number of rings you selected
(Rings to Answer setting). Then it will begin emitting fax reception tones to the
sending fax machine and receive the fax.

Use the phone cord
supplied in the box with
your HP Fax

Telephone
wall jack

Back view of the HP Fax