HP 1240 Series User Manual
Page 105
![background image](/manuals/92023/105/background.png)
user guide
troubleshooting information
95
tr
oubl
eshoot
ing
The front panel
displays the wrong
language.
The HP Fax has been set up with the incorrect language or
country/region. Usually, you set the language and country/region
when you first set up the HP Fax. However, you can change these
settings at any time by using the following procedure:
1
Press
Setup
.
2
Press
6
, then press
3
.
This selects Preferences and then selects Set Language &
Country/Region.
After starting the routine, the following prompt is presented
on the front panel display:
Press 11 for English?
If you want to change the language to English, enter 11
using the keypad, or you can also scroll through the
languages using " or !. Otherwise, wait for five seconds
and the display changes automatically to the next available
language. When you see the language you want, enter its
two-digit number using the keypad.
3
When prompted to confirm the language, press
1
for Yes or
2
for No.
You are prompted with all the countries/regions for the
selected language. You can also scroll through the countries/
regions using " or !.
4
Using the keypad, enter the two-digit number for the desired
country/region.
5
When prompted, press
1
for Yes or
2
for No.
6
You can confirm the language and country/region by
printing a Self-Test Report, as follows:
a. Press
Setup
.
b. Press
1
, then press
5
.
This selects Print Report, and then selects Self-Test Report.
I received a message
on the front panel
display to align the
print cartridges.
The HP Fax prompts you to align cartridges every time you install
a new print cartridge. For more information, see
problem
possible cause and solution