HP 1240 Series - Manual (Page 44)

hp fax 1240 series
chapter 3
34
fax
This selects Print Report and then selects Automatic Reports Setup.
3 Press ! to scroll through the following report types:
– Every Error : prints whenever there is any kind of fax error (default).
– Send Error : prints whenever there is a transmission error.
– Receive Error : prints whenever there is a receiving error.
– Every Fax : confirms every time a fax is sent or received.
– Send Only : prints every time a fax is sent.
– Off : does not print fax reports.
Note: If you select Send Only, you will also receive error reports if there is
any kind of error generated.
4 Press OK to select a report.
Print Report
1: Automatic Reports Setup
2: Last Transaction
3: Fax Log
4: Speed Dial List
5: Self-Test Report
6: Caller ID Report *
7: Junk Fax Report
*
* Not available in all countries/
regions. If Caller ID service is not
supported in your country/
region, this menu item will not
appear in the Print Report menu.
Automatic Reports Setup
Every Error
Send Error
Receive Error
Every Fax
Send Only
Off