HP 1240 Series - Manual (Page 124)

hp fax 1240 series
chapter 8
114
tr
oubl
eshooting
automatic document feeder messages
severe error messages
Memory full; press
OK.
The memory is full or the HP Fax has too many faxes stored in memory.
Print the faxes stored in memory. Or, you can unplug the HP Fax to
delete all faxes stored in memory.
See reprint the faxes in memory on page 49 for more information.
Paper mismatch. Try
changing paper size
or paper in tray, then
press OK.
The Paper Size setting does not match the actual size of the paper that
is loaded in the paper tray.
Make sure the Paper Size setting matches the size of the paper that is
loaded in the paper tray. If there is a mismatch, you can either change
the Paper Size setting or the paper in the paper tray.
message solution
message solution
Original jam. Clear
jam, and then press
OK.
Paper has jammed in the automatic document feeder.
Clear the jam from the automatic document feeder and try the job again.
Do not load more than 20 sheets in the automatic document feeder.
For more information, see paper jams on page 97.
Feeder problem. Re-
load original, and
then re-start job. Press
OK to continue.
The automatic document feeder did not work properly, and the job did
not finish.
Try loading the originals into the automatic document feeder again, and
restart the job. Do not load more than 20 sheets in the automatic
document feeder.
error message solution
Fatal error. Call for
service.
A fatal error denoted by an eight-character error code has made the
HP Fax misfunction.
Note the error code and contact Hewlett-Packard.
Error. Reset power.
Some problem occurred that can only be corrected by turning the power
off and then back on. An eight-character error code might be included.
Note this number in case the problem persists and you need to contact
HP.
Turn the power off and then back on.