BendixKing KMD 250 - Manual (Page 99)

1-80
Rev 2 Apr/2004 KMD 250 Pilot's Guide
Section 1
Basic Operation
9. To change the ground
speed as in Figure 1-60, Use
the Joystick to place the cursor
in the desired field. Use the
Rotary Knob to enter the
desired values. Note the
changes to the ETA and FUEL.
Yellow indicates user entered
data and data calculated from
user entered data.
10. With the cursor over the
GNDSPD value, press the USE
ACTUAL Softkey to return the
ground speed to the actual
GPS ground speed as shown
in Figure 1-161. Note also that
the ETA and FUEL values
have also returned to actual
values.
Fuel flow (FFLOW) values can
be changed in the same
manner as ground speed. Fuel
flow and ground speed can
also be changed in conjunction with one another to work out different
scenarios.
NOTE: If the KMD 250 is not interfaced with a functioning fuel flow mon-
itor, the fuel values will always be displayed in yellow.
11. Press the DONE Softkey to return to the FLIGHT PLAN INDEX
Page. The flight plan created in this process can now be deleted if no
longer needed.
Flight Plan Operation
Figure 1-160
Figure 1-161