BendixKing KMD 250 - Manual (Page 116)

1-97
Rev 2 Apr/2004 KMD 250 Pilot's Guide
Section 1
Basic Operation
8. The flight plans and way-
points are now written to the
new card as shown in Figure 1-
186. Press the OK Softkey.
NOTE: In units that do not
contain the internal GPS, refer-
ences to flight plans will not be
displayed. For example the
title of the window in Figure 1-
186 will be “USER WAYPOINT
DATA STORED”.
TRANSFERRING DATA
BETWEEN DATACARDS
User stored data such as flight
plans and waypoints can be
moved between datacards.
The following displays depict
those seen on a KMD 250 con-
taining the internal GPS.
STORE CURRENT USER
DATA ON ANOTHER DATA-
CARD
To move from one datacard to
another, perform the following
steps:
1. Press the MENU Key.
2. Press the AUX MENU
Softkey to display Figure 1-
187. Use the Joystick to high-
light User FPL Save/Load as
shown.
3. Press the SELECT Softkey to display Figure 1-188.
4. If necessary, use the Joystick to highlight Store current user data
on another datacard.
5. Press the SELECT Softkey.
Datacards
Figure 1-187
Figure 1-188
Figure 1-186