BendixKing KMD 250 - Manual (Page 180)

2-61 Rev 4 Aug/2007 KMD 250 Pilot's Guide
Section 2
FIS Operation
5. Move the Joystick to the
right to highlight the next char-
acter space as seen in Figure
2-74.
6. Turn Rotary Knob clockwise
until an A is selected as in
Figure 2-75. Continue moving
the cursor and entering charac-
ters until EAGLE is displayed.
7. Press the KNOB SCAN
Softkey and Figure 2-76 will be
displayed.
8. Turn the Rotary Knob to
sequence through all the loca-
tion names in the database
beginning with EAGLE. stop-
ping at the desired name as in
Figure 2-77.
9. Press the OK Softkey to
select EAGLE GROVE MUN
as the User Defined area.
NOTE: This same method
may be used with the name of
the city where the airport is
located.
This method is also used to
choose the desired airport
among those of identical
names, but located in different
cities.
Normal Operation
Figure 2-74
Figure 2-75
Figure 2-76
Figure 2-77
KMD 250 FIS_R4 8/13/07 10:07 AM Page 2-61