BendixKing KMD 250 - Manual (Page 55)

1-36
KMD 250 Pilot's Guide
Section 1
Basic Operation
Map Operation
Rev 2 Apr/2004
3. To change to one of the
other Find parameters, press
the NEAREST TYPE Softkey
to display the SELECT
NEAREST TYPE window as
shown in Figure 1-57.
4. Use the Joystick or Rotary
Knob to place the cursor over
the desired Find type.
5. Press the OK Softkey.
6. If Airports is selected as
the type (as in Figure 1-57),
pressing the AIRPORT
FILTER Softkey (Figure 1-58)
will display the AIRPORT
FILTER CRITERIA Window
as shown in Figure 1-59.
7. The listed airports can be
filtered by runway length and
runway type. Use the Joystick
to place the cursor over the
desired field and use the
Rotary Knob select the the
desired value. When finished
press the OK Softkey.
Figure 1-57
Figure 1-58
Figure 1-59