HP 5/xx Series 4 - Manual (Page 66)

4 The HP Setup Program
Using the HP Setup Program
54 English
• Within a field selects the next lower value and selects the
next higher value.
• displays a sub-menu for menu items marked with a solid
right arrow .
• or + allows you to exit from a sub-menu.
• The and arrows select menus from the menu bar.
• loads factory-installed default values.
• restores previous values from CMOS.
• or + displays the general help screen.
• exits from the general help screen.
• Use the key to exit Setup without saving any changes.
• Use the key to save your settings and exit Setup.
Pressing the or arrow keys while you are on a main menu
screen, will take you to the next menu option. If, however, you are on a
sub-menu screen and you press these arrows, you will stay on that
screen.
Use the and arrow keys to scroll through the items on the
general help screen.
The Setup
Configuration Summary You can view a summary of the PC’s configuration if you have chosen to
view the POST tests. A summary screen is displayed when the POST has
completed. It is displayed for a few seconds only, but you can “freeze” it
so that you can verify the configuration. Press the Pause/Break key to
“freeze” the summary screen. When you have finished reading the
summary, press any key to continue.
Setup changes system behavior by modifying the power-on
initialization parameters. Setting incorrect values may cause system
boot failure. Should this occur, press
. This will load Setup default
values to recover.
uno.bk : uno4_stu.fb4 Page 54 Monday, July 21, 1997 12:46 PM