HP 5/xx Series 4 - Manual (Page 58)

3 How to Install Accessories In Your PC
Installing Mass Storage Devices
46 English
5 Slide the drive completely into the bottom shelf and secure it with
the screws provided with the device.
6 If a device was removed from the middle shelf, replace it.
7 If no device was removed from the middle shelf, replace the RFI
bezel.
8 Install any other accessories before replacing the cover. Reconnect
all cables and power cords.
Configuring the Device or Devices you have installed
After installing an IDE drive or a flexible disk drive, you will need to
run the Setup program to autotype or to configure the device. Refer to
chapter 4, “The HP Setup Program” for details of how to do this.
uno.bk : uno3_ins.fb4 Page 46 Monday, July 21, 1997 12:46 PM