HP 5/xx Series 4 - Manual (Page 15)

English 3
1 Setting Up Your PC
Unpacking Your PC
2 Place the PC on a sturdy desk near to easily accessible power outlets,
with enough space for the keyboard, mouse, and any other
accessories.
3 Position the PC so that its rear connectors are easily accessible.
4 Place the display on top of the computer. (If you have a large display,
place it next to the computer.)
Installation Tools No tools are required to set up your PC. However, if you plan to install a
disk drive or an accessory board in your PC, you will need a flat-blade
screwdriver. For further information about installing accessories, refer
to chapter 3, “How to Install Accessories In Your PC”.
WARNING If you are in any doubt that you can lift the display safely, do not try to
move it without help. Refer to the display’s manual for information
about the display.
uno.bk : uno1_set.fb4 Page 3 Monday, July 21, 1997 12:46 PM