HP 5/xx Series 4 - Manual (Page 45)

English 33
3 How to Install Accessories In Your PC
Installing Accessory Boards
Installing the Board
1 Disconnect the computer’s power supply cord.
2 Remove the computer’s cover and power supply.
3 Find a free slot. Some boards may have preferred locations and
special installation instructions detailed in their manuals.
4 Unscrew and remove the slot cover. Store it in a safe place.
If the slot cover is tight, loosen the screws on the adjacent slots.
5 Hold the board horizontally by its “top” edge. Slide it into the board
guide of the chosen slot. Do not bend the board.
6 Align the board’s connector with the slot’s socket. Firmly press the
board into the socket. Ensure the board’s connector engages
completely with the socket and does not touch components on other
boards.
uno.bk : uno3_ins.fb4 Page 33 Monday, July 21, 1997 12:46 PM