HP 5/xx Series 4 - Manual (Page 18)

1 Setting Up Your PC
Connecting the Power Cords
6 English
Connecting the Power Cords
1 If fitted, remove the label covering the computer’s power connector.
2 Connect the power cords to the display and the computer.
3 Connect the display’s power cord and the computer’s power cord to
a grounded outlet. (The connectors are shaped to go in one way
only.)
WARNING For your safety, always connect the equipment to a grounded wall
outlet. Always use a power cord with a properly grounded plug, such
as the one provided with this equipment, or one in compliance with
your national regulations.
This PC is disconnected from the power by removing the power cord
from the power outlet. This means the PC must be located close to a
power outlet that is easily accessible.
Display
Power Cord Computer
Power Cord
Grounded Outlet
uno.bk : uno1_set.fb4 Page 6 Monday, July 21, 1997 12:46 PM