HP 5/xx Series 4 - Manual (Page 35)

English 23
3 How to Install Accessories In Your PC
Removing the Cover
Replacing the Cover after Installing Accessories
1 Check that you have installed all your accessories.
2 Make sure that all internal cables are properly connected and safely
routed.
3 Ensure the cover lock is unlocked and the tabs are inwards.
4 Lower the cover onto the computer, and firmly slide it into position.
5 Slide the two tabs on the front of the cover outwards.
6 If a keylock is fitted, lock the cover using the key.
7 Place the display on top of the computer. Reconnect all cables and
power cords.
uno.bk : uno3_ins.fb4 Page 23 Monday, July 21, 1997 12:46 PM