HP 5/xx Series 4 - Manual (Page 64)

4 The HP Setup Program
Using the HP Setup Program
52 English
Using the HP Setup Program
Setup is an integrated (ROM-based) program that displays the PC’s
configuration and allows you to set parameters.
Check the configuration when you first use the PC and each time after
you install, remove, or upgrade accessories.
If an error message is displayed, see chapter 5, “Troubleshooting Your
PC”.
NOTE If you are unable to change the PC’s configuration, check that you
entered the correct password when you started Setup and whether the
Secure switch (system board switch 8) is set to the OPEN position. For
further information on switches refer to “System Board Connectors and
Switches” on page 95.
The BIOS Setup is menu-driven, enabling you to easily access all the
options which are grouped in the following categories:
• Main
• Preferences
• Configuration
• Security
• Power, and
• Exit.
A solid right arrow, , indicates categories which have sub-menus.
Starting the Setup Program
1 Turn on the display and then the PC.
If the PC is already turned on, save your data and exit all programs,
then press
and to restart the PC (Windows
3.11). For Windows 95, use the Shut Down command.
2 Press while F2=Setup is displayed at the bottom of the screen.
F2=Setup appears for a short period, during the POST (Power-On-
Self-Test). Press if you wish to view the POST. If there is an error
during the POST, it will automatically be displayed.
Delete
uno.bk : uno4_stu.fb4 Page 52 Monday, July 21, 1997 12:46 PM