Energizer 715 - Manual (Page 88)

66 Chapter: 5
How to program the Bolus Wizard feature
You need your personal settings from the Bolus Wizard feature settings table to setup the Bolus
Wizard feature. Your Bolus Wizard feature settings are programmed in the EDIT SETTINGS screen.
Main > Bolus > Bolus Wizard Setup > Edit Settings
Once the settings are programmed, you do not have to program them again unless the values
change. After you program one setting, the screen will automatically go to the next required setting.
After you program all your settings, review them as described in this section to make sure they are set
correctly.
Instructions for programming the Bolus Wizard feature settings are given below. Program your
settings in the order described to make sure you program all the settings.
Bolus Wizard feature on/off
1 Go to the EDIT SETTINGS screen.
Bolus > Bolus Wizard Setup >
Edit Settings
2 Select Wizard and press ACT .
3 Select On or Off and
press ACT .
4 The EDIT SETTINGS
screen will appear.
Press
ACT to program
your settings.
- - -
- - -
EDIT SETTINGS
Wizard Off
Carb Units:
BG Units:
ACT
WIZARD ON/OFF
Off
On
ACT
- - -
- - -
EDIT SETTINGS
Wizard: On
Carb Units:
BG Units:
ACT