Energizer 715 - Manual (Page 148)

126 Chapter: 8
4 You will see a RESET screen, and then the pump will go through various
screens while it restarts. After the pump clears all of your settings, the
screen will go to the TIME/DATE SETUP screen
5 Reset the time and date as described in “Setting the time and date” on
page 23.
6 After you set the time and date, you must rewind your pump. See
“Rewinding your pump” on page 47 for instructions. Remember, all your
settings have been cleared and you must either restore or reprogram all
your settings.
History
If you want to view a listing of the dates and times of all recent User Settings operations you have
done on your pump, such as saves and restores, take the following steps:
1 Go to the UTILITIES screen and select User Settings. Then, hold
down and press ACT .
Main > Utilities > User Settings
2 The USER SETTINGS screen is displayed. Select History and press
ACT .
3 The SETTINGS HISTORY screen displays, giving you a list of all the
dates and times of your most recent User Setting operations. Use
the scroll bar to view the entire history. When you are done
looking at the history, press
ACT / ESC to exit the menu.
Settings cleared
by user
Reprogram settings
ESC, ACT to clear
3:32A
RESET
Selftest
Language
UTILITIES MENU
User Settings
ACT
USER SETTINGS
Restore Settings
Clear Settings
ACT
History
SETTINGS HISTORY
15MAR
10MAR
03MAR
12FEB 09:15A
04:15P
10:03A
12:10P Restor
Save
Save
Restor
ESC/ACT