Energizer 715 - Manual (Page 107)

Optimizing pump therapy 85
5 The SQUARE DURATION screen will appear. Enter the amount of time
you want the Square Wave bolus to last and press
ACT .
NOTE -
If you have the BG Reminder feature turned on, a screen
displays allowing you to accept or modify the length of time after
this bolus before you are reminded to check your blood glucose.
6 The BOLUS DELIVERY screen will appear. The pump will beep or vibrate at the start and end of the
bolus. As the bolus is delivered, the screen will show the bolus type and amount until the total units
have been delivered.
For a
Square Wave bolus
do these steps: For a
Dual Wave bolus
do these steps:
a. Select Square Wave Bolus . Press ACT .
The SET SQUARE BOLUS screen will appear.
b. Enter the desired amount
for the Square Wave
bolus units and press
ACT .
c. Continue to step 5 .
a. Select Dual Wave Bolus and press ACT. The SET
DUAL BOLUS TOTAL screen will appear.
b. Enter the desired amount
for the total dual bolus
units. Press
ACT .
NOTE -
The number of units you enter for
the SET DUAL BOLUS TOTAL is a total of
both the normal and Square Wave bolus
units.
c. In the next screen, press
/ to change the
normal (Now) and Square
portions of the Dual Wave
bolus. Press
ACT . Notice
the screen also shows the
percentage amount for each portion.
d. Continue to step 5.
SET SQUARE BOLUS
1.2U
SET DUAL BOLUS TOTAL
1.2U
0.6U
0.6U
Now:
50%
Square:
50%
ACT
SQUARE DURATION
Sq: 1.2U
0:30