Basal examples, Basal programming, Practice: basal programming – Energizer 715 User Manual
Page 57: Basic programming 35
Basic programming 35
If you need to program more than one basal rate for the day, do these steps:
a.
In the SET START TIME 2 screen,
enter the start time for the next
rate and press
ACT
.
b.
The SET BASAL RATE 2 screen will
appear. Enter the rate and press
ACT
.
c.
Repeat steps
a
and
b
for each
additional basal rate. Each rate will
have a different number (i.e. Basal
Rate 1, Rate 2, Rate 3, etc.).
d.
After you program your last basal rate, press
ESC
.
e.
The BASAL RATE screen will appear. Your basal rate(s) will now
deliver as programmed. Exit the menus.
NOTE -
When you have finished programming your pump you can save your
settings. See “User settings” on page 123 for instructions.
Practice: Basal programming
Make sure you are NOT connected to your pump while practicing.
Set a basal rate of 0.5 unit per hour.
Check here if you were able to set the basal rate:
What is the total basal insulin for 24-hours?
______
(answer: 12 units)
start time (flashing)
/
to set
rate (flashing)
/
to set
SET START TIME 2
- -: - -
_. _ _
SET BASAL RATE 2
7:30A
_. _ _
ACT
ACT
U
H
U
H
SET START TIME 3
- -: - -
_. _ _
BASAL RATE
Current Rate
Started #1 -
24 Hr. Total
0.60U/H
12:00A
14.40U
ESC
U
H