Energizer 715 - Manual (Page 28)

6 Chapter: 1
How to use this guide
NOTE - This User Guide shows sample screens only. Your pump screens may be slightly different.
For step-by-step instructions, refer to the appropriate sections in this guide. See the Glossary for
definitions of terms and functions. The terms and symbols used in this guide are in the table below.
Term / symbol Meaning
“Press” To push and release the pump button
“Hold” To push and keep pressure on the pump button
“Select” To choose an item in a list on the pump screen using the / buttons
“Exit the menus”
To leave the current pump menu and return to the HOME screen by pressing
the
ESC button until the HOME screen appears
Pump Buttons Always bold and uppercase (for example, ESC , ACT )
Screen and menu names Always uppercase; for example, MAIN MENU, REWIND screen
Menu selections
Always bold; for example, 12-Hour Setup , On , Off
flashing (blinking)
screen item
You can change the value for that item with the / buttons
NOTE and TIP Additional helpful information
CAUTION:
Warns of a potential hazard which, if not avoided, may result in minor or
moderate damage to the equipment
WARNING:
Notifies you of a potential hazard which, if not avoided, could result in
death or serious injury. It may also describe potential serious adverse
reactions and safety hazards
“Go to the...screen.”
When a step instructs you to “Go to” a screen, the path to that screen is
shown. For example:
1. From the MAIN MENU, select Utilities and press ACT .
2. In the UTILITIES MENU, select Alarm and press ACT .
3. The ALARM MENU appears.
Go to the ALARM MENU.
Main > Utilities > Alarm