Energizer 715 - Manual (Page 143)

Utilities 121
Lock keypad feature
Lock keypad prevents accidental pump keypad presses. The only button you can press is the to
view the STATUS screen. The remote control can be used to give a bolus or put the pump into Suspend.
To lock keypad
1 Go to the Lock Keypad screen
Main > Utilities > Lock Keypad
To unlock keypad
1 Press the button and the button at the
same time.
Selftest
Selftest is a safety utility that allows you to check if your pump is operating properly. This self-
diagnostic feature can be used for maintenance or to check your pump if it operates unusually. During
selftest, your pump will automatically run internal tests, including a check for proper operation of the
beep and vibrate modes. The selftest is additional to the routine tests that run independently while the
pump operates.
Contact the Medtronic MiniMed 24-hour Product Help Line if any of the tests do not occur as
described here.
NOTE - If the pump detects a condition such as low battery, the selftest will not finish. A message
will appear to show the condition that caused the test to stop.
2 Select Utilities
Press
ACT
.
3 Select Lock Keypad
Press
ACT
.
4 Press ACT to lock keypad.
Basal
Prime
ACT
MAIN MENU
Utilities
UTILITIES MENU ACT
Alarm
Daily Totals
Lock Keypad
KEYPAD LOCKED
To unlock, press B
a
nd UP keys at the
same time
ACT Press ACT to Lockout
Keypad
Press ESC to Cancel
KEYPAD
UNLOCKED