Energizer 715 - Manual (Page 68)

46 Chapter: 4
Changing your infusion set
Removing the reservoir
Each time you remove and replace a reservoir in your pump, you have to rewind and prime your
pump. Priming requires insulin.
11 Tap the side of the
reservoir to remove
any air bubbles. 12 To purge air bubbles that have
risen to the top of the reservoir,
push up on the plunger until you
see insulin in the tubing. 13 Without pulling, turn the
plunger counter-clockwise to
remove it from the reservoir.
1 Remove the entire infusion set from your body.
2 If attached, remove the activity guard.
3 Turn the tubing connector 1/2-turn counter
clockwise, then pull the reservoir and connector out
from the pump.
4 Safely dispose of the used reservoir and infusion set items.
5 You must now rewind your pump as described in “Rewinding your pump” on page 47.
tubing connector
1/2 turn counter-clockwise