Energizer 715 - Manual (Page 66)

44 Chapter: 4
Filling the reservoir
WARNING: Your pump will not accurately deliver insulin if air bubbles are in the
reservoir or the infusion set. To prevent this, take care to remove air
bubbles when filling your reservoir.
1 Remove reservoir from package. Make sure
plunger rod is fully extended. 2 Swab vial with alcohol.
3 Making sure you do not push down on the
plunger, press the transfer guard onto the vial.
4 Push down on the plunger to pressurize the vial.
plunger
rod
reservoir
transfer
guard
vial