Energizer 715 - Manual (Page 111)

Optimizing pump therapy 89
Using the Bolus Wizard feature for a Square Wave or Dual Wave bolus
If you are using the Bolus Wizard feature to calculate your Square Wave or Dual Wave bolus
amounts, you will be prompted to enter your blood glucose reading and/or the (carb or exchange) units
you will eat. The Bolus Wizard feature will use this input to calculate your suggested correction and/or
food bolus amount. If you do not want to use the Bolus Wizard feature estimate, you can change it, if
desired.
1 The Bolus Wizard feature must be turned on and the settings must be programmed. Also, make sure
the dual/square option is turned on.
NOTE -
If you want to use the pump-to-meter link, make sure the meter option is on. See “Meter
option” on page 73 for instructions.
2 After you enter your blood glucose and/or food entry,
review the information in the ESTIMATE DETAILS screen.
Press
ACT to continue to step 3 . If you need to make any
changes, press ESC to return to the ENTER BG screen and
make changes as necessary.
3 In the next screen, select Square Wave Bolus
or Dual Wave Bolus as desired and press ACT .
NOTE -
If you are using the Bolus Wizard
feature and it calculates that your bolus
includes a portion to correct your high blood
glucose, the Square Wave bolus will not be
available. This helps you to select a bolus type
(Normal or Dual Wave) that has an immediate
delivery option to cover your high blood glucose.
(values shown are
for example only)
ESTIMATE DETAILS
Est total: 4.0U
Food intake: 45gr
(Meter) BG: 160
Food:3.0U
Correction:2.0U
Active Ins: 1.0U
ACT to proceed,
ESC to back up
(using the Bolus
Wizard feature)
(without the Bolus
Wizard feature)
BOLUS EST: 4.0U
Normal Bolus
Square Wave Bolus
Dual Wave Bolus
BOLUS TYPE
Normal Bolus
Square Wave Bolus
Dual Wave Bolus
ACT
ACT
BOLUS EST: 4.0U
Normal Bolus
Dual Wave Bolus