Nikon Zfc Mirrorless Camera with 28mm Lens - Manual (Page 77)

Inserting the battery and a memory card
77
･ The battery level display changes as the battery level diminishes,
from
L through K , and H . When the battery level falls to H ,
suspend shooting and charge the battery or ready a spare battery.
･ If the message [Shutter release disabled. Recharge battery.] is
displayed, charge or exchange the battery.
D
The standby timer
The camera uses a standby timer to help reduce the drain on the battery. If
no operations are performed for about 30 seconds, the standby timer will
expire and the monitor, viewfinder, and control panel will turn off. A few
seconds prior to turning off, the displays will dim. They can be reactivated by
pressing the shutter-release button halfway. The length of time before the
standby timer expires automatically can be selected using Custom Setting c3
[Power off delay] > [Standby timer].
Number of exposures remaining
･ When the camera is on, the shooting display shows the number of
photographs that can be taken at current settings.
･ Values over 1000 are rounded down to the nearest hundred. For
example, values between 1500 and 1599 are shown as 1.5 k.
Monitor Viewfinder