C2: self-timer, C3: power off delay – Nikon Zfc Mirrorless Camera with 28mm Lens User Manual
Page 355
A
Custom Settings: Fine-tuning camera settings
355
c2: Self-timer
G
button
U
A
Custom Settings menu
Choose the length of the shutter release delay, the number of shots
taken, and the interval between shots in self-timer mode.
Option
Description
[S
elf-timer delay] Choose the length of the shutter-release delay.
[Number of
shots]
Press
1
and
3
to choose the number of shots taken
each time the shutter-release button is pressed; choose
from values of from 1 to 9.
[Interval
between shots]
Choose the interval between shots when [Number of
shots] is more than 1.
c3: Power off delay
G
button
U
A
Custom Settings menu
Choose how long the monitor or viewfinder remains on when no
operations are performed.
・
Different settings can be chosen for [Playback], [Menus], [Picture
review], and [Standby timer].
・
[Standby timer] determines how long the monitor, viewfinder, or
control panel remains on after the shutter-release button is pressed
halfway. The monitor and viewfinder dim a few seconds before the
standby timer expires. If [10 s] is selected, the timer will be extended
to 20 seconds while the
i
menu is displayed.
・
With the exception of [Picture review], each of the power-off delays
is extended by one minute in self-timer mode.
・
Longer power-off delays reduce battery endurance.