Nikon Zfc Mirrorless Camera with 28mm Lens - Manual (Page 403)

B
The setup menu: Camera setup
403
D
Acquiring Image Dust Off reference data
･ A lens with a focal length of at least 50 mm is recommended.
･ When using a zoom lens, zoom all the way in.
･ The same reference data can be used for photographs taken with different
lenses or at different apertures.
･ Reference images cannot be viewed using computer imaging software.
･ A grid pattern is displayed when reference images are viewed on the
camera.
Pixel mapping
G
button U B
setup menu
Pixel mapping checks and optimizes the camera image sensor. If you
notice unexpected bright spots appearing in pictures taken with the
camera, perform pixel mapping as described below.
･ Pixel mapping is available only when a Z mount lens or an optional
FTZ mount adapter is attached.
･ To prevent unexpected loss of power, use a fully-charged battery or
an optional charging AC adapter.
1
Select [Pixel mapping] in the setup menu.
Turn the camera on, press the
G
button, and select [P ixel
mapping] in the setup menu.
2
Select [Start].
Pixel mapping will start. A message is displayed while the operation
is in progress.