Network – Brother HL-L3230CDW Wireless Compact Printer User Manual
Page 329
Level 1
Level 2
Level 3
Description
TCP/IP
WINS Server Primary
Specify the IP address of the primary WINS server.
Secondary
Specify the IP address of the secondary WINS server.
DNS Server
Primary
Specify the IP address of the primary DNS server.
Secondary
Specify the IP address of the secondary DNS server.
APIPA
-
Allocate the IP address from the link-local address range
automatically.
IPv6
-
Turn the IPv6 protocol on or off. For more detailed information, go to
your model's
FAQs & Troubleshooting
page on the Brother
support website at
Ethernet
-
-
Choose the Ethernet link mode.
Wired Status
-
-
Display the Ethernet link status.
MAC Address
-
-
Display the MAC address of the machine.
Network Reset
-
-
Restore all network settings of your machine to the factory settings.
1
On connection to the network, if the machine's ‘Boot Method’ is ‘Auto’ the machine will attempt to set the IP address and Subnet Mask
from a boot server such as DHCP. If a boot server cannot be found, an APIPA IP address will be allocated, such as 169. 254. [001-254].
[000-255]. If the ‘Boot Method’ of the machine is set to ‘Static’, you must manually enter an IP address from the machine's control panel.
[Network]
For wireless network models
Level 1
Level 2
Level 3
Level 4
Descriptions
WLAN
TCP/IP
Boot
Method
-
Choose the IP method that best suits your needs.
IP Address
-
Enter the IP address.
Subnet
Mask
-
Enter the Subnet mask.
Gateway
-
Enter the Gateway address.
Node Name
-
Enter the Node name.
WINS
Config
-
Select the WINS configuration mode.
WINS
Server
Primary
Specify the IP address of the primary WINS server.
Secondary
Specify the IP address of the secondary WINS
server.
DNS Server Primary
Specify the IP address of the primary DNS server.
Secondary
Specify the IP address of the secondary DNS
server.
APIPA
-
Allocate the IP address from the link-local address
range automatically
IPv6
-
Turn the IPv6 protocol on or off. For more detailed
information, go to your model's
FAQs &
Troubleshooting
page on the Brother support
website at
Setup Wizard
-
-
Configure the wireless network settings using the
setup wizard.
WLAN Assistant
-
-
Configure your wireless network settings using the
Brother installation disc.
WPS
-
-
Configure your wireless network settings using the
one-button push method.
324