Brother HL-L3230CDW Wireless Compact Printer - Manual (Page 327)

Level 1 Level 2 Level 3 Level 4 Descriptions
Wired LAN TCP/IP WINS
Server Secondary Specify the IP address of the secondary WINS
server.
DNS Server Primary Specify the IP address of the primary DNS server.
Secondary Specify the IP address of the secondary DNS
server.
APIPA - Allocate the IP address from the link-local address
range automatically
1 .
IPv6 - Turn the IPv6 protocol on or off. For more detailed
information, go to your model's
FAQs &
Troubleshooting page on the Brother support
website at support.brother.com .
Ethernet - - Choose the Ethernet link mode.
Wired Status - - Display the Ethernet link status.
MAC Address - - Display the MAC address of the machine.
Set to Default - - Restore wired network settings of your machine to
the factory settings.
Wired Enable - - Turn the wired interface on or off.
WLAN TCP/IP Boot
Method - Choose the IP method that best suits your needs.
IP Address - Enter the IP address.
Subnet
Mask - Enter the Subnet mask.
Gateway - Enter the Gateway address.
Node Name - Enter the Node name.
WINS
Config - Select the WINS configuration mode.
WINS
Server Primary Specify the IP address of the primary WINS
server.
Secondary Specify the IP address of the secondary WINS
server.
DNS Server Primary Specify the IP address of the primary DNS server.
Secondary Specify the IP address of the secondary DNS
server.
APIPA - Allocate the IP address from the link-local address
range automatically
1 .
IPv6 - Turn the IPv6 protocol on or off. For more detailed
information, go to your model's
FAQs &
Troubleshooting page on the Brother support
website at support.brother.com .
Setup Wizard - - Configure the wireless network settings using the
setup wizard.
WLAN Assistant - - Configure your wireless network settings using the
Brother installation disc.
WPS - - Configure your wireless network settings using the
one-button push method.
WPS w/PIN Code - - Configure the wireless network settings using
WPS with a PIN code.
WLAN Status Status - Display the wireless Ethernet link status.
Signal - Display the signal condition.
322