Brother HL-L3230CDW Wireless Compact Printer - Manual (Page 328)

Level 1 Level 2 Level 3 Level 4 Descriptions
WLAN WLAN Status Channel - Display the channel in use when Status is
Active .
Speed - Display the connection speed when Status is
Active .
SSID - Display SSID.
Comm. Mode - Display the current Communication mode.
MAC Address - - Display the MAC address of the machine.
Set to Default - - Restore wireless network settings of your machine
to the factory settings.
WLAN Enable - - Turn the wireless interface on or off.
Wi-Fi
Direct Push Button - - Configure your Wi-Fi Direct network settings using
the one-button push method quickly.
PIN Code - - Configure your Wi-Fi Direct network settings using
WPS with a PIN code quickly.
Manual - - Configure your Wi-Fi Direct network settings
manually.
Group Owner - - Set your machine as the Group Owner.
Device Info. Device
Name - View your machine's device name.
SSID - Display the Group Owner's SSID.
IP Address - Display your machine's IP Address.
Status Info. Status - Display the Wi-Fi Direct network status.
Signal - Display the current Wi-Fi Direct network signal
strength.
When your machine acts as Group Owner, the
LCD always displays
Strong .
Channel - Display the channel in use when the Status is
G/O Active or Client Active .
Speed - Display the connection speed when the Status is
G/O Active or Client Active .
I/F Enable - - Enable or disable the Wi-Fi Direct connection.
Network
Reset - - - Restore all network settings of your machine to
the factory settings.
1 On connection to the network, if the machine's ‘Boot Method’ is ‘Auto’ the machine will attempt to set the IP address and Subnet Mask
from a boot server such as DHCP. If a boot server cannot be found, an APIPA IP address will be allocated, such as 169. 254. [001-254].
[000-255]. If the ‘Boot Method’ of the machine is set to ‘Static’, you must manually enter an IP address from the machine's control panel.
[Network]
For wired network models
Level 1 Level 2 Level 3 Description
TCP/IP Boot Method - Choose the IP method that best suits your needs.
IP Address - Enter the IP address.
Subnet Mask - Enter the Subnet mask.
Gateway - Enter the Gateway address.
Node Name - Enter the Node name.
WINS Config - Select the WINS configuration mode.
323