Brother HL-L3230CDW Wireless Compact Printer - Manual (Page 16)

3. Menu Buttons
OK
Press to select the displayed option. After you change a setting, the machine returns to the previous menu
level.
Back
• Press to go back one level in the menu.
• Press to select the previous digit when entering letters or numbers.
a or b (+ or -)
• Press to scroll through menus and options.
• Press to enter or change a letter or number. Hold down a or b to scroll faster. When you see the letter
or number you want, press OK .
4. Secure
Press to print jobs saved in the memory when you enter your four-digit password.
5. Go
• Press to clear certain error messages. To clear all other errors, follow the LCD instructions.
• Press to print any data remaining in the machine's memory.
• Press to select the displayed option. After you change a setting, the machine returns to Ready Mode.
6. Error LED
The Error LED blinks when the LCD displays an error or an important status message.
7. Data LED
The Data LED blinks depending on the machine’s status.
When the Data LED is on, data is in the machine’s memory. When the Data LED blinks, the machine is
receiving or processing data.
8. Cancel
• Press to cancel the current setting.
• Press to cancel a programmed print job and clear it from the machine’s memory. To cancel multiple print
jobs, hold down
Cancel until the LCD displays [Cancel All Jobs] .
9. Power On/Off
• Turn on the machine by pressing .
• Turn off the machine by pressing and holding down .
11