Brother HL-L3230CDW Wireless Compact Printer User Manual
Page 174
> Use the Store Print Log to
Network's Error Detection Setting
Use the Store Print Log to Network's Error Detection Setting
Use Error Detection Settings to determine the action that is taken when the print log cannot be stored to the
server due to a network error.
1. Start your web browser.
2. Type "https://machine's IP address" in your browser's address bar (where "machine's IP address" is the
machine's IP address).
For example:
https://192.168.1.2
3. If the machine prompts you for a password, type it, and then click
.
4. Click the
Administrator
tab.
5. Click the
Store Print Log to Network
menu in the left navigation bar.
6. In the
Error Detection Setting
section, select the
Cancel Print
or
Ignore Log & Print
option.
Option
Description
Cancel
Print
If you select the
Cancel Print
option, the print jobs are canceled when the print log cannot be
stored to the server.
Ignore Log
& Print
If you select the
Ignore Log & Print
option, the machine prints the documentation even if the
print log cannot be stored to the server.
When the store print log function has recovered, the print log is recorded as follows:
a. If the log cannot be stored at the end of printing, the print log except the number of printed
pages will be recorded.
b. If the print log cannot be stored at the beginning and the end of printing, the print log of
the job will not be recorded. When the function has recovered, the error is reflected in the
log.
7. Click
Submit
to display the
Test Print Log to Network
page.
To test your settings, click
Yes
and then go to the next step.
To skip the test, click
No
. Your settings will be submitted automatically.
8. The machine will test your settings.
9. If your settings are accepted,
Test OK
appears on the screen.
If
Test Error
appears, check all settings, and then click
Submit
to display the Test page again.
Related Information
•
169