Brother HL-L3230CDW Wireless Compact Printer - Manual (Page 326)

Level 2 Level 3 Level 4 Description
HP LaserJet Top Margin - Set the top margin distance from the top edge of the
paper.
Bottom Margin - Set the bottom margin distance from the bottom
edge of the paper.
Lines - Set the number of lines on each page.
Tray Command - Select this setting if a tray mismatch appears when
you use the HP drivers.
BR-Script 3 Error Print - Choose whether the machine prints the error
information when errors occur.
CAPT - Use CAPT (Color Advanced Printing Technology) for
optimal print quality when printing a PS file created
by a non-Brother PS driver.
Colors and photos appear clearer and more
accurate. Print speed will be slower.
Color Correction Calibration Calibrate Initiate color calibration to check and correct colors.
Reset Reset the calibration parameters to the default
settings.
Registration - Align the print position of each color.
Auto Correction - Set the machine to perform Color Calibration and
Registration automatically.
Color Settings Setting Mode Select whether to apply the color print settings of the
machine or the printer driver.
Color Mode Select the color mode.
Improve Gray Turn on or off to improve the image quality of
shaded areas.
Enhance
Black Turn on or off if a black graphic does not print
correctly.
Brightness Adjust the brightness.
Contrast Adjust the contrast.
Red Adjust the red color.
Green Adjust the green color.
Blue Adjust the blue color.
[Network]
For wired and wireless network models
Level 1 Level 2 Level 3 Level 4 Descriptions
Wired LAN TCP/IP Boot
Method - Choose the IP method that best suits your needs.
IP Address - Enter the IP address.
Subnet
Mask - Enter the Subnet mask.
Gateway - Enter the Gateway address.
Node Name - Enter the Node name.
WINS
Config - Select the WINS configuration mode.
WINS
Server Primary Specify the IP address of the primary WINS
server.
321