AG Neovo PD-55Q 55" 4K Commercial Display - Manual (Page 75)

70
ADJUSTING THE LCD DISPLAY
Item Function Operation Range
Schedule
Start time: Set time when the
schedule is turned on.
1 Press the / button on the
control panel or the / button on
the remote control to select the
Start time option.
2 Press the button on the
control panel or the button
on the remote control to open
the start time field.
3 Press the / button on the
control panel or the / button on
the remote control to select the
hours.
4 Press the button on the
control panel or the button
on the remote control to set the
hours.
5 Press the button on the
control panel or the button
on the remote control. Then
press the / button on the
control panel or the /
button
on the remote control to select
CANCEL or OK .
6 Press the button on the
control panel or the button on
the remote control to select the
minutes field and repeat steps 2
to 5 to set the minutes.
CANCEL
OK
End time: Set time when the
schedule is turned off. Repeat steps 1 to 6 in the previous
section (Start time) to set end time. CANCEL
OK