Product description – AG Neovo PD-55Q 55" 4K Commercial Display User Manual
Page 22
18
PRODUCT DESCRIPTION
1
AC IN
AC power input
2
Main power switch
Switch the main power on/off.
3
LAN
For internet connection with an Ethernet cable.
4
AUDIO OUT
Connect audio signals output (3.5 mm Stereo
Audio Jack).
5
DP IN
Connect DisplayPort signals input.
6
DP OUT
Connect DisplayPort signals output.
7
DVI-I IN
Connect DVI signals input.
For VGA input, you can use either the DVI male
to VGA adapter or the DVI to VGA cable.
8
HDMI1 IN
Connect HDMI signals input.
9
HDMI2 IN
Connect HDMI signals input.
10
HDMI3 IN
Connect HDMI signals input.
11
PC LINE IN
Connect audio signals input (3.5 mm Stereo
Audio Jack).
12
IR-IN
IR signal input.
13
IR-OUT
IR signal output for the loop-through function.
Note:
♦
This display’s remote control sensor
will stop working if the jack [IR IN] is
connected.
14
microSD Card Slot
Insert a microSD memory card.
15
USB 2.0 Port (Service / USB Playback
Function)
Connect USB 2.0 for service and USB
playback.
16
USB 2.0 Port (USB Playback Function)
Connect USB 2.0 for USB playback.
17
RS232 IN
Connect RS232 input from external equipment.
18
RS232 OUT
Connect RS232 output to additional displays.
19
SDM Slot
Connect the SDM module.
20
SECURITY LOCK
Used for security and theft prevention.
PD-65Q
MUTE
MENU
INPUT
RS232
OUT
RS232
IN
USB 2.0
USB 2.0
IR-OUT
IR-IN
PC LINE IN
MICRO SD
HDMI3 IN
LAN
AUDIO OUT
DP IN
DP OUT
DVI-I IN
HDMI1 IN
HDMI2 IN
1
2
20
3
4
5
6
10
11
12
13
14
15
16
17
18
19
7
8
9