AG Neovo PD-55Q 55" 4K Commercial Display - Manual (Page 71)

66
ADJUSTING THE LCD DISPLAY
Item Function Operation Range
Uniwall
Frame comp.: If frame
compensation is enabled, the
display will adjust the image to
compensate for the width of the
display bezels in order to accurately
display the image.
1 Press the / button on the
control panel or the / button on
the remote control to select the
setting.
2 Press the button on the
control panel or the button
on the remote control to enable
the function.
-
Enable: If Uniwall is enabled, the
display will apply the settings in
H
monitors , V monitors , Position ,
and Frame comp. .
Note: It is recommended to
enable this function first , so that
you can directly see the result when
you configure the H monitors , V
monitors , and Position settings.
-
Switch On Delay: Set the power-on
delaying time (in seconds).
Note: If the setting is set to Auto ,
the system allows a sequential
powering-on for each display by
their ID number when multiple
displays are connected.
1 Press the / button on the
control panel or the / button on
the remote control to select the
setting.
2 Press the button on the
control panel or the button
on the remote control to set the
value.
3 Press the / button on the
control panel or the / button
on the remote control to adjust
the value.
Off
Auto
2 to 255
Off timer
Switch off the display after a
specified time (using the countdown
timer).
Press the / button on the
control panel or the /
button
on the remote control to adjust the
value.
Off
1 to 24 Hours
Date and time
Adjust the current date and time for the display’s internal clock.
Note: The NTP Server is set automatically and cannot be altered.
Auto Sync: Date and time are set
automatically by the web server.
1 Press the / button on the
control panel or the / button
on the remote control to select
Auto Sync option.
2 Press the button on the
control panel or the button
on the remote control to set the
value.
Auto Sync