AG Neovo PD-55Q 55" 4K Commercial Display - Manual (Page 66)

61
ADJUSTING THE LCD DISPLAY
6.5 Configuration2 Settings
OSD turn off
OSD H position
OSD V position
System rotation
Information OSD
Logo
Monitor ID
Heat status
Monitor information
DP version
HDMI Version
Configuration2 reset
45
50
50
Landscape
10
On
Action
35.88°C 96.57°F
Action
1.4
Action
Picture
Screen
Audio
Configuration 1
Configuration 2
Advanced option
1 Press the MENU button on the control
panel or the button on the remote
control to call out the OSD window.
2 Press the / button on the control
panel or the / button on the remote
control to select
Configuration 2 .
Then press the button on the
control panel or the
button on the
remote control.
3 Press the / button on the control
panel or the / button on the remote
control to select an option.
4 Press the button on the control
panel or the button on the remote
control to open the submenu item.
Item Function Operation Range
OSD turn off
Set the period of time the OSD menu
stays on the screen.
Press the / button on the
control panel or the /
button
on the remote control to adjust the
value.
Off
5 to 120
OSD H position
Set the OSD menu horizontal
position on the screen.
0 to 100
OSD V position
Set the OSD menu vertical position
on the screen.
0 to 100
System rotation
Use this function to select the
screen orientation.
Note:
• This option is available only if the
input source is USB.
• With other input sources, if
the setting is set to Portrait ,
only the OSD menu screen will
change to portrait.
1 Press the / button on the
control panel or the / button
on the remote control to select
the setting.
2 Press the button on the
control panel or the button
on the remote control to set the
value.
Landscape
Portrait
Information
OSD
Set the period of time the
information OSD is displayed on
the upper left corner of the screen.
The information OSD will appear on
the screen when the input signal is
changed. The information OSD will
remain on the screen if the setting
is set to
OFF .
Press the / button on the
control panel or the /
button
on the remote control to adjust the
value.
Off
1 to 60