AG Neovo PD-55Q 55" 4K Commercial Display - Manual (Page 57)

52
ADJUSTING THE LCD DISPLAY
Item Function Operation Range
Picture reset
Reset all settings in the Picture menu
to the factory preset values.
1 Press the / button on the
control panel or the / button
on the remote control to select
the setting.
2 Press the button on the
control panel or the button
on the remote control to set the
value.
CANCEL
RESET
6.2 Screen Settings
H position
V position
Clock
Clock phase
Zoom mode
Custom zoom
Auto adjust
Screen reset
Full
Action
Action
Action
Picture
Screen
Audio
Configuration 1
Configuration 2
Advanced option
1 Press the MENU button on the control
panel or the button on the remote
control to call out the OSD window.
2 Press the / button on the control
panel or the / button on the remote
control to select
Screen . Then press
the button on the control panel or
the
button on the remote control.
3 Press the / button on the control
panel or the / button on the remote
control to select an option.
4 Press the button on the control
panel or the button on the remote
control to open the submenu item.
Item Function Operation Range
H position
Move the image to the right or to
the left.
Note: This option is available only if
the input source is VGA.
Press the / button on the
control panel or the /
button
on the remote control to adjust the
value.
0 to 100
V position
Move the image up or down.
Note: This option is available only if
the input source is VGA.
0 to 100