AG Neovo PD-55Q 55" 4K Commercial Display - Manual (Page 70)

65
ADJUSTING THE LCD DISPLAY
Item Function Operation Range
Power LED light
Set the display LED indicator on or
off.
1 Press the / button on the
control panel or the / button on
the remote control to select the
setting.
2 Press the button on the
control panel or the button
on the remote control to set the
value.
On
Off
Keyboard
control
Enable or disable the keyboard
(control panel buttons) function of
the LCD display.
• Unlock: Enable the keyboard
function.
• Lock All / Lock all but Volume
/ Lock all but Power / Lock all
except PWR & VOL: Disable all
the keyboard function.
Note: To disable the keyboard
control function, press both the
and on the control panel for
more than 3 seconds.
1 Press the / button on the
control panel or the / button on
the remote control to select the
setting.
2 Press the button on the
control panel or the button
on the remote control to set the
value.
Unlock
Lock All
Lock but
Volume
Lock All but
Power
Lock all except
PWR & VOL
Uniwall
With this function you can create a single large-screen matrix (video wall) that consists of up to
150 sets of this display (up to 15-sets on the horizontal and 10-sets on the vertical sides). This
function requires a daisy-chain connection.
H monitors: Select the number of
displays on the horizontal side.
1 Press the / button on the
control panel or the / button on
the remote control to select the
setting.
2 Press the button on the
control panel or the button
on the remote control to set the
value.
3 Press the / button on the
control panel or the / button
on the remote control to adjust
the value.
1 to 15
V monitors: Select the number of
displays on the vertical side.
1 to 10
Position: Select the position of this
display in the screen matrix.
1 to 150