AG Neovo PD-55Q 55" 4K Commercial Display - Manual (Page 53)

48
6.1 Picture Settings
Brightness
Contrast
Sharpness
Black level
Tint
Color
Noise reduction
Gamma selection
Color temperature
Color control
Smart power
Overscan
90
50
20
50
50
55
Off
Native
Native
Action
Off
Off
Picture
Screen
Audio
Configuration 1
Configuration 2
Advanced option
1 Press the MENU button on the control
panel or the button on the remote
control to call out the OSD window.
2 Select Picture , then press the
button on the control panel or the
button on the remote control.
3 Press the / button on the control
panel or the / button on the remote
control to select an option.
4 Press the button on the control
panel or the button on the remote
control to open the submenu item.
Item Function Operation Range
Brightness
Adjust the luminance of the screen
image.
Press the / button on the
control panel or the /
button
on the remote control to adjust the
value.
0 to 100
Original Setting High Setting Low Setting
Contrast
Adjust the difference between the
black level and the white level.
Note: This option is not available in
USB mode.
Press the / button on the
control panel or the /
button
on the remote control to adjust the
value.
0 to 100
Original Setting High Setting Low Setting
CHAPTER 6: ADJUSTING THE LCD DISPLAY