AG Neovo PD-55Q 55" 4K Commercial Display - Manual (Page 55)

50
ADJUSTING THE LCD DISPLAY
Item Function Operation Range
Gamma
selection
Adjust the non-linear setting for
picture luminance and contrast.
Note: This option is not available in
USB mode.
1 Press the button on the
control panel or the button
on the remote control to open
the settings.
2 Press the / button on the
control panel or the / button on
the remote control to select the
setting.
3 Repeat step 1 to set the setting.
4 Press the button and then
the / button on the remote
control to select CANCEL or
OK .
5 Press the button on the
control panel or the button
on the remote control to confirm
the setting.
Native
2.2
2.4
S gamma
D-image
Color
temperature
Select a color temperature for the
image. A lower color temperature
will have a reddish tint, whilst a
higher color temperature gives off a
more bluish tint.
1 Press the button on the
control panel or the button
on the remote control to open
the settings.
2 Press the / button on the
control panel or the / button on
the remote control to select the
setting.
3 Repeat step 1 to set the setting.
4 Press the button and then
the / button on the remote
control to select CANCEL or
OK .
5 Press the button on the
control panel or the button
on the remote control to confirm
the setting.
6500K
7500K
9300K
10000K
Native
User 1
User 2