AG Neovo PD-55Q 55" 4K Commercial Display - Manual (Page 45)

40
USB SOURCE
4.3.2 System Settings
To access the system settings, do the following:
1 Enter the Admin Mode. See “4.3.1 Entering the Admin Mode” on page 39.
2 Do any of the following to access the system settings:
— Press the or button to select the Settings tab and then press the button.
— Press the or button and then press the button to open Apps tab > Settings .
3 Modify any of the following settings:
Note:
♦ Use the , , , , and/or button on the remote control to select items and adjust settings. If
you need to enter characters, the virtual keyboard opens automatically on the screen after you
select the item.
— Network & Internet > Ethernet > Ethernet : Enable or disable configuring Ethernet settings.
— Network & Internet > Ethernet > Ethernet Configuration : Review MAC address and configure
the network connection settings, such as Connection Type (DHCP or static IP), IP Address ,
Netmask , DNS Address , and Gateway .
— Signage Display > General settings > Signage Display Name : Review or modify the signage
display name if necessary.
— Signage Display > General settings > Boot Logo : Set boot animation. The system checks for
the “boot animation.zip” file from the connected USB storage or SD card.