AG Neovo PD-55Q 55" 4K Commercial Display - Manual (Page 56)

51
ADJUSTING THE LCD DISPLAY
Item Function Operation Range
Color control
Adjust the color tones of the image
precisely by changing the User-R
(Red), User-G (Green) and User-B
(Blue) settings independently.
Note:
• Color control option becomes
available if you set the Color
temperature to
User 1 or User 2 .
• This option is not available in
USB mode.
1 Press the / button on the
control panel or the / button on
the remote control to select the
setting.
2 Press the button on the
control panel or the button
on the remote control to set the
value.
3 Press the / button on the
control panel or the / button
on the remote control to adjust
the value.
User-R (0-
255) (User 1)
User-G (0-
255) (User 1)
User-B (0-255)
(User 1)
2000K -
10000K (User
2)
Smart power
Smart Power control is not relative to
brightness control:
• Initial setting Brightness
»
80 (in the range from 0-100)
»
Power consumption
80% of maximum power
consumption
• Smart Power
»
Off: No adaptation.
»
Medium: 70% of power
consumption is relative to
the current settings.
»
High: 55% of power
consumption is relative to
the current settings.
1 Press the / button on the
control panel or the / button on
the remote control to select the
setting.
2 Press the button on the
control panel or the button
on the remote control to set the
value.
Off
Medium
High
Overscan
Change the display area of the image.
• On: Display area is about 95%.
• Off: Display area is about 100%.
Note: This option is not available in
USB mode.
1 Press the / button on the
control panel or the / button on
the remote control to select the
setting.
2 Press the button on the
control panel or the button
on the remote control to set the
value.
Off
On